? 2014 littelfuse, inc. specifcations are subject to change without notice. revised: 07/24/14 2 description features agency approvals absolute maximum ratings ? for ratings of individual members of a series, see device ratings and specifcations chart agency standard agency file number ul1449 3rd edition e320116 caution: stresses above those listed in "absolute maximum ratings" may cause permanent damage to the device. this is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specifcation is not implied. lsp05 module series lsp05 series units continous: steady state applied voltage: max ac voltage range (v m(ac)rms ) 150 to 510 v transient: maximum discharge current 8/20s waveform (imax) 10,000 a nominal discharge current 8/20s waveform (i n ) 5,000 a operating ambient temperature range (t a ) -45 to +85 c storage temperature range (t stg ) -45 to +125 c isolation voltage capability (when the thermal disconnect opens) 600 v insulation resistance >1,000 m ? maximum discharge current, 10ka, 8/20us ? meets ansi c136.2/ ieee c62.41.2 location category c low exposure ? parallel connected spd device ? thermally protected varistor technology ? ip66 water-proof and dust-proof ? indication wire lead options for parallel connected modules ? ce compliance iec61643-11 class ii/ en61643-11 type 2 ? compact form factor (48x48x30mm) with mounting tabs ? 240vac and 277vac voltage ratings are ce compliant and available for class i and class ii installation based on iec protection classes applications ? outdoor and commercial led lighting ? roadway lighting ? traffc lighting ? digital signage ? wash wall lighting ? parking garage/lot lighting ? flood lighting ? tunnel lighting ? street lighting notes: 1. these parts are in compliance with iec61643-11 class ii (low voltage system) and en61643-11 type 2 (low voltage system). 2. tested for temporary overvoltage from low-voltage system faults per iec 61643-11 the littelfuse lsp05 thermally protected surge protective device is a self-protected device which is specially designed to be used in outdoor and commercial led lighting fxtures for transient overvoltage protection. it is constructed with littelfuse thermally protected varistor technology. its built-in thermal disconnect function provides additional protection to prevent catastrophic failure and fre hazard even under the extreme circumstances of varistor end-of-life or sustaining over voltage conditions. the lsp05 spd facilitates custom - ers product compliance to ieee c62.41.2 location category c low and us dept of energy msslc model spec. rohs additional information datasheet samples resources varistor products thermally protected varistor module > lsp05
? 2014 littelfuse, inc. specifcations are subject to change without notice. revised: 07/24/14 3 notes: 1. nominal discharge current (in)(a): the nominal discharge current is a measure of the spds endurance capability; 15 impulses of discharge current uses the 8/20us current waveform. 2. maximum discharge current (imax)(a): the maximum discharge current is a measure of the spds maximum capability; single impulse of discharge current uses the 8/20us current waveform. 3. mlv C ul1449 measured limiting voltage; the highest value of residual voltage measurements during the application of impulses of 8/20us nominal discharge current (in); an average voltage value of 15 impulses 4. up C iec 61643-11 voltage protection level; the highest value of residual voltage measurements during the application of impulses of 8/20us nominal discharge current (in); a rounding voltage value of maximum measurement. lsp05 series device ratings & specifcations part number operating voltage (vac) mcov/uc (vac) maximum discharge current (imax)(a) 2 nominal discharge current (in)(a) 1 m lv (v) 3 up (v) 4 LSP05120P 120 150 10,000 5,000 l-n:680 l-g:680 n-g:630 800 lsp05240p 240 275 10,000 5,000 l-n:1100 l-g:1100 n-g:1100 1200 lsp05277p 277 320 10,000 5,000 l-n:1270 l-g:1270 n-g:1220 1400 lsp05347p 347 420 10,000 5,000 l-n:1600 l-g:1600 n-g:1580 1700 lsp05480p 480 510 10,000 5,000 l-n:1780 l-g:1780 n-g:1730 1900 lsp05240llp l-l:240 l-l:275 10,000 5,000 l-l:1100 l-l:1200 l-n/g:120 l-n/g:150 l-n/g:680 l-n/g:800 lsp05480llp l-l:480 l-l:510 10,000 5,000 l-l:1780 l-l:1900 l-n/g:277 l-n/g:320 l-n/g:1270 l-n/g:1400 dimensions notes: 1. black: line; white: neutral; green: ground (p/n with suffx x3333/x3316: brown: line; blue: neutral; green-yellow stripe: ground) 2. black: r1; red: r2; blue: r3 3. wire gauge: awg14 wire line in, awg22 wire for indication; wire length: 100mm or customized 56.0 0.5 10 0 20 10 0 20 48.0 1 .5 48.01 .5 t ypical dimensions (mm) 3 indication wires all use the aw g22. 2x ?4.80.2 lsp05xxxxxp lsp05xxxxxpm 64.0 1 .5 30.0 1 .0 6 2 6 2 2.3 0.2 56.0 0.5 10 0 20 10 0 20 48.0 1 .5 48.01 .5 t ypical dimensions (mm) 3 indication wires all use the aw g22. 2x ?4.80.2 lsp05xxxxxp lsp05xxxxxpm 64.0 1 .5 30.0 1 .0 6 2 6 2 2.3 0.2 varistor products thermally protected varistor module > lsp05 lv ultramo v ? s eries
? 2014 littelfuse, inc. specifcations are subject to change without notice. revised: 07/24/14 4 l n g sp d l l n /g o r a c/d c p owe r suppl y le d m odul e l n + - r le d n o rmally o n p a r a lle l conne c t i on wit h le d indic a t in g sp d s t a t u s - on ( gr een ) : sp d is o n lin e - off: sp d n eed s r e p lac e m e n t lsp05xxxp m r1 r2 r3 n c l n g sp d l l n /g o r l l n /g o r le d m odul e l n + - r le d n o rmally o f f p a r a lle l conne c t i on wit h le d indic a t in g sp d s t a t u s - off: sp d is o n lin e - on ( r e d ) : sp d n eed s r e p la c e m e n t lsp05xxxp m r1 r2 r3 a c/d c p owe r suppl y l n g sp d le d m odul e l n + - p a r a lle l conne c t i on a c/d c p owe r suppl y l n g sp d le d m odul e l n + - parallel conne c t i on (for class ii unearthed) ~x3316 a c/d c p owe r suppl y part numbering system device family littelfuse surge pr otection module lsp 05 480ll p xxxxx nominal discharge current (in) operating vo ltage connection mode ll: for l,l,n/g blank: l-n, l-g, n-g p or pm (p: parallel connection; pm: parallel connection and with monitor indication wi re ) other options : x3333: with gnd wi re connection, available for 240v ac and 277v ac rating with ce marking for class i ear th installation. x3316: without gnd wir e connection, available for 240v ac and 277v ac rating with ce marking for class ii unear th installation. notes: 1. led indicator and associated circuitry are not included in the module. application/installation schematic varistor products thermally protected varistor module > lsp05
|
